FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
*all prices include VAT |
Erfurt MAV Wallrock Power Adhesive is a high strength ready mixed water-borne wallpaper adhesive specifically for use with non-woven Wallrock papers and paste-the wall-type wallcoverings (NOT insulating papers) . It has a higher strength than Erfurt MAV Easy Paste.
Readymixed wall paper pastes are generally considered superior to flake type wallpaper adhesives which you mix yourself, as the mix is quality controlled by the manufacturer.
Erfurt MAV Wallrock Power Adhesive contains a fungicide and biocide to resist mould growth during the drying period. Use straight from the tub. The paste is smooth and non lumpy; spreads easily; slides well for easy pattern matching; and doesn't 'split' over time.
Higher strength, specifically formulated for use with Wallrock non-woven paste the wall type wallpapers (see links on right hand side of page, although it can be used with most normal papers) including:
All surfaces must be properly prepared, clean, dry, sound, and absorbant. For non absorbant surfaces such as wood panelling, abrade the surface lightly to provide a key for the adhesive. Ideally seal all surfaces with a water-borne stabilising solution or a specialist product like Zinsser Guardz, before applying this adhesive. Do NOT seal surfaces with PVA.
Application: Follow the manufacturers instructions. Apply directly from the tub using either a paint roller, or pasting brush. Apply sufficiant adhesive to hang two lengths of wallcovering at a time. Position the wallcoverings. Then smooth out with a paperhangers brush or wallcovering smoother. Remove any excess adhesive with a damp decorators sponge.
Coverage: Maximum coverage is between 3-4 square meters per Kg. of material, dependent on porosity and absorbancy of the surfaces to be covered:
Type of Wallcovering | Approx Coverage (sq meters per Kg) |
Non-wovens & Paste the Wall Papers | 4 |
Wallrock Papers (excluding insulating) | 3 - 4 |
Note: Ensure adhesive is dry before over-painting, or decorating etc. Drying time is a minimum of 24 hours, but may be considerably longer depending on temperature and drying conditions. Protect from frost. Do NOT store below 5 deg C.
Erfurt MAV Wallrock Power Adhesive is available in a re-sealable round 5 kg plastic container (sufficiant for covering between 15-20 square meters); and a re-sealable round 10 kg plastic container (sufficiant for covering up to 30-40 square meters);
Copyright ©1999-2023 by Decorating Direct Limited