Fossa TrueMask 86 Delicate Precision Masking Tape

Fossa TrueMask 86 Delicate Precision Masking Tape, is a UV resistant, low-tack, flat-backed washi painters masking tape, capable of producing razor sharp lines, and colour transitions. Adhesive Strength to Steel: 11. TrueMask 86 uses a lower-tack, and lighter grade of Washi paper than fossa TrueMask 82. It's suitable for projects with more delicate surfaces. The clean release time on exteriors is up to 4 weeks, and 7 weeks on interiors. 

  • Suitable for more delicate projects.
  • High contrast blue tape.
  • Up to 7 weeks release indoors.
  • Up to 4 weeks release outdoors.
  • Clean removal.
  • Acrylic-based adhesive.
Thickness: 0.095 mm
Tensile Strength: 26 N/10mm
Adhesive Strength to Steel: 1.05 N/10mm



120 deg C.


Important: Pressure sensitive adhesives degrade over time, and can be affected by moisture, temperature, environment and pressure. Please ensure you store your tapes sensibly, and away from the light, in a cool and dry place; the cooler the better, preferably 15°C or cooler. In summer months, the sun can be very strong, and temperatures very high. Vehicles interiors can become very hot, so definitely avoid leaving your tapes inside a vehicle, otherwise the pressure sensitive adhesive may be adversely affected, causing residue problems when removing. In cold weather, and also when exposed to temperatures below freezing, allow sufficiant time for tapes to slowly reach room temperature before using them (this may take 12-24 hours).

Fossa TrueMask 86 Delicate Precision Masking Tape is available in 1 inch (24mm) and 1.5 inch (36mm) widths, each roll is 50 meters long. It's also available in bulk carton quantities to save you even more.

single roll24mm x 50m£2.79
box of 3624mm x 50m£91.66
single roll36mm x 50m£3.90
box of 2436mm x 50m£90.57

*all prices include VAT

As low as
Fossa TrueMask 86 Delicate Precision Masking Tape