FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
Brilliant multi-purpose scraping tool with 1.5mm thick blade. Includes 4 different screwdriver bits stored inside handle, which can fit in the handle end, a roller cleaner, nail extractor, paint can lid opener, bottle opener, raking out cracks, etc.
For cleaning and preparing floors, removing loose and flaking floor paint by scraping, and removing contamination, including grease, fat and dirt. Heavy duty galvanised steel head accepts any sized wooden broom handle with unique quick release clamping design. Fitted with 200mm (8 inch) replaceable sprung steel blade.
Replacement sprung steel blade which fits our heavy duty floor scraper. Actual blade size 196mm x 75mm (approx 3 x 8 inches).
Budget 3 Piece Caulking Tool Kit for smoothing and obtaining a professional caulking finish. If you're not too confident with your ability to use a mastic gun and decorators caulk to seal joints and corners, this handy little kit can help you obtain a better finish.
A handy selection of flexible stainless steel blades for small mixing and filling jobs on walls, ceilings and woodwork. Each pack contains one each of the following 120mm, 100mm, 80mm and 50mm width blades.
Useful caulking and sealant profiling kit which contains 3 different smoothing tools with various angles and radius's, sufficient for most sealing projects with caulk, mastic, or silicone sealant. Ideal for worktops, and sanitary sealing. Kit also contains a removing tool for existing caulk.
5 in 1 scraper tool will scrape, rake, open cans, clean paint rollers and scrape angles. Hardwood handle with stainless steel tooling. High quality tools for the professional decorator.
Black Plastic Paint Stirrer 320mm / 12.5in long. Support hook to hold on rim lip of can, to prevent it falling in, and to allow to drain. Suitable for 1L and 2.5L cans, but not quite long enough to stir a 5L can
Rectangular scraping blade, sometimes called a cabinet scraper, or card scraper. Manufactured from high quality German steel stock 150mm x 60mm. Generally used for producing fine smooth surfaces on flat substrates, just prior to final sanding and/or application of coatings.
Straight plastic caulking blade with wooden handle. Use with filler for smoothing, caulking and jointing surfaces, or textured coatings when artexing etc. Available in 8 inch, 10 inch and 12 inch wide sizes
Clipt Putty Knife with scale tang hardwood handle and stainless steel blade which runs the entire length of the handle. 1.5 inch / 38mm
Combination Shavehook for removing paint and varnish etc. from irregular surfaces. Hardwood handle and stainless tooling.
Lightweight professional taping and smoothing knife for applying filler and joint compounds. Innovative offset handle design, sprung stainless steel blade, smaller handle featuring a soft grip overlay and flexible fins to reduce hand moisture and improve grip. Improved ergonomics and less hand fatigue. Feel the difference! 8in and 10in blades.
Extra stiff 100% black tapered Nylon filament with chiselled edge for hanging and smoothing vinyl wallcoverings. 40mm bristle length out, double brush head construction. 1/2 inch thick. Comfortable shaped unfinished hardwood handle with hanging hole. Stainless steel ferrule.
NEW - dee dee 2 inch Flexible Scale Tang Scraper with hardwood scale handle. High quality 100% Stainless-steel blade. Instead of bumping up against paint and wallpaper, it slides underneath to remove paint and wallpaper quickly and easily. 2 inch wide blade.
Inexpensive budget 3 piece set contains 2in and 3in stainless steel scale tang scrapers, and a 3in flexible stainless steel scale tang filling knife. Perfectly fine for a variety of DIY stripping, scraping and filling projects.
12, 20 and 30 inch long multi-purpose Trim, Edge and Spray Shield. Use as a Paint Trim Guide, Spray Shield Masker, Dry Wall Tool, Scraper & Patcher, Stripping blade, Wallpaper Trim Guide etc. Blade width is 4 inches. Light weight, fully anodised rust-resistant finish, with off set 7 inch tubular steel handle with soft grip handle.
Highly flexible stainless steel blade which runs the entire length of the hardwood handle. High Quality tools for the professional decorator. Available in 1, 2, 3 and 4 inch blades.
0.5 litre PVC filler mixing bowl (not cheap rubber), allows easier removal of dried filler from inside the pot. Size top 5 inch dia., bottom 2.75 inch dia, height 3.5 inches.
Replacement Fossa Fosbide Cemented Tungsten Carbide Blade 2inch / 50mm wide. Fits all Fosbide scrapers and equivalent Stanley and Linbide scrapers. Reversible blade with two edges, which will hold it's edge up to 50 times longer than standard blades. Highest tungsten content available. Sold singles and packs containing 10 single blades.
NEW slightly wider 60mm Replacement Fossa Fosbide Cemented Tungsten Carbide Blade 2 3/8inch / 60mm wide. Still fits all Fosbide scrapers and equivalent Stanley and Linbide scrapers. Reversible blade with two edges, which will hold it's edge up to 50 times longer than standard blades. Highest tungsten content available. Sold singles and packs of 10.
50mm wide Fosbide Heavy Duty Tungsten Carbide Scraper. Rugged alloy construction, with comfortable handle - for long periods of use. Takes replaceable double-edge 50mm Fosbide Slimline Tungsten Carbide Blades. Use for the removal of paint, glue, rust or varnish on all surfaces. Direct alternative to the Linbide scraper.
Replaceable cemented tungsten carbide tipped blade. Reversible blade with two edges, which lasts up to 50 times longer than standard blades. Fits Hamilton Prestige, Bahco 440/650/442, Harris 3670, Faithful TCT scrapers etc. and many more. 50mm / 2in wide.
Fosbide Tungsten Carbide Scraper removes of glue, paint, varnish, boat anti-foul coatings, woodstains and rust from flat surfaces with/without a heat gun or chemical stripper. 50mm wide double sided reversible blade. Use on wood, concrete, metal, GRP. Ideal for stripping boat hulls, windows, doors, wooden trim, rusty metal, stonework, concrete etc.
Fossa Wallpaper Scorer Triple Head can quickly and easily score and perforate waterproof wallcoverings with this multi-directional scorer tool, allowing your stripping liquid to get behind the paper to dissolve the paste, for very easy removal. Triple scoring head for faster perforating of larger surfaces.
14 inch Replacement Blade for the fossa Wrapper. Clip on, clip off. Four adjustment setting holes of 0.75, 1.0 1.5 and 2.0 inch masking tape widths. Specially stiffened stainless steel blade, with redesigned teeth for easier cuts.
Spare scraping blades for the Trufa hardwood hand scraper. Replacement blades sold in pairs. Available in 40mm and 60mm sizes.
Hardwood hand scraper, with double sided curved hardened steel blades. For general scraping, and paint and coating removal. Use on both smooth and rough wood surfaces. Two sizes available; a 40mm wide (1 9/16 inch approx), and a 60mm wide (2 3/8 inch approx).
4 inch heavy duty scraper, shortened 3 inch tubular handle with comfortable grip. Replaceable 4 inch blades. Ideal for removing unwanted material from Glass, Metal, Wood, Tiles, Marble etc.
Large 4 inch triangular blade scraper for heavy duty paint removal and scraping tasks. Hardened Steel blade. 12 inch long two handed wooden handle. Heavy duty forged blade clamp. Blades are replaceable. Top quality hand made tool from a traditional German forge works.
Replacement triangular blade for Trufa Heavy Duty GE Paint Scraper. Hand forged and specially hardened steel triangular blade, approximately 115mm x 115mm x 105mm ( 4.5 x 4.5 x 4 inch ) along each side.
Flat sided filling container, for proper loading of wide bladed filling and smoothing knives up to and including 12 inch width. Contoured 3 inch wide base, for easy holding and clean-up. Textured outer grip. Galvanised metal scraping inserts for cleaning filling knives of dried material as you work. 2 litre capacity.
Flat sided filling container, for proper loading of wide bladed filling and smoothing knives up to and including 14 inch width. Contoured 3 inch wide base, for easy holding and clean-up. Textured outer grip. Galvanised metal scraping inserts for cleaning filling knives of dried material as you work. 2 litre capacity.
Flexible industrial razor blades for use with our now discontinued plastic glass scraper. These extremely sharp and flexible blades remove material from glass, metal and other glazed or smooth surfaces far more effectively than other scrapers which use a Stanley type blade.
8 inch unfinished hardwood handle, riveted to a 9 inch crystal clear, stiff 3mm thick Lexan blade. Hanging hole in blade. Use for smoothing heavy duty commercial vinyl and glass-fibre wallpaper and wallcoverings. Dimensions: 9 x 4.5 inch (228 x 117mm).
Tungsten carbide tipped replacement blades, for the Linbide 50mm (2 inch) scraper. Sold loose in singles and packs of 5, or, supplied in a plastic container in packs of 10 at an even better discount.
Professional 2 inch tungsten carbide tipped scraper, for fast paint, glue and varnish removal on flat wood substrates. A super hard and durable metal blade which will hold it's edge for longer than other standard steel blades.
Heavy duty wall scraper with 4 inch blade and long handle. Normally used for removing wallcoverings, paint, silicone sealant and scale.
Adjustable adaptor which clamps virtually any paint brush, roller frame or tool handle that will fit inside the clamp (maximum round handle size 35mm dia., maximum overall width between clamping screws 50mm). Super tough 100% metal construction made in the USA. Useful when painting, scraping, wire brushing, sweeping, dusting or cleaning hard to reach areas.
For finishing of internal and external corners when filling or plastering. High quality comfortable 'easy-grip' molded plastic handle. Sprung stainless steel design. Manufactured in the USA. Size: 2 x 2 x 4 inches. Available with a 90 degree corner, or, a 1/8 inch radius corner, in both external and internal corner versions.
Miniature solid tungsten carbide de-nibbing tool for quickly and easily removing paint drips, runs, sags and dirt from smooth surfaces. Gently push the sharp chamfered edges against the paint blemish whilst the blade is at an almost horizontal angle to remove in one sweep. Size 48 x 28mm.
43mm wide multi-purpose scraper and cutting knife that takes thicker 0.6mm replaceable blades. Ideal for scraping, paint stripping, shaving filler, and general cutting. It's got a tough nylon handle, and solid brass quick release mechanism for fast blade changes. Comes with a free 9mm auto-locking snap-off knife whilst stocks last.
Sharp edged high quality stainless steel scraper. Ideal for removing silicone and caulk, general scraping and glass cleaning. 58mm wide blade permanently fitted to a tough nylon handle. Rust and acetone resistance makes it well suited for wet projects.
A pack of 3 spare BTB-1 blades which fit the Olfa BTC-1 Scraper and Cutting Knife. Supplied in a reuseable plastic container. Each blade is 43mm x 43mm x 0.6mm and has two cutting edges, so is reversible for a fresh edge. Each edge is specially ground on one side only.
Simple anodised metal paint roller cleaner and scraper, for cleaning paint rollers. In-line handle allows you to get some muscle, directly behind the business end of the tool. It's much better than the cleaning tool you'll find on some scrapers. Works best with USA style 1.5 inch core rollers.
Top quality Nylon paint stirrer, with sharpened flat end and holes to aid stirring. Side can clip so that stick can be left to drain inside the can. Overall length 317mm (12.5 inches) long.
Large hardwood paint stirrer. Ideal for more easily stirring larger 5 litre cans of paint or mixing paste. Almost 1cm thick it's strong enough to stir thick and viscous liquids without bending, and without any risk of snapping. Dimensions 390mm x 28mm x 8mm (15 1/4 x 1 1/8 x 5/16 inch).
Trufa painters scraper with 50mm (2 inch) flexible steel blade. More flexible than a scraper, but less flexible than a filling knife. Standard DIY sized varnished hardwood handle.
Disposable straight edge plastic scraper, spreader or filling knife. Use for mixing and spreading fillers and adhesives. Saves getting your good quality filling knives covered in filler or adhesive. Available in 2 inch and 3 inch widths.
Disposable straight edge plastic scraper, spreader or filling knife. Use for mixing and spreading fillers and adhesives. Saves getting your good quality filling knives covered in filler or adhesive. Available in 100mm (approx 4 inch) and 150mm (approx 6 inch) widths.
Disposable double ended curved edge plastic scraper, filling knife, plastic spreader, or mixing blade. Use for mixing and spreading adhesives and fillers. Thin and highly flexible blades approx 1.5 inches wide.
Disposable serrated edge plastic spreader. Use for spreading adhesives. Available in 3 inch width.
Heavy duty 50mm wide carbide paint scraper. For the removal of paint, glue, rust or varnish on all surfaces. Replaceable twin edge blades and shaped screw-fit handle. Direct alternative to the Linbide scraper.
5 pack of spare 50mm carbide blades for the Prodec Heavy Duty Scraper
Flexible steel blade. German manufactured. Extremely lightweight. More flexible than a scraper, but less flexible than a filling knife. Blade end is slightly slanted to aid scraping tasks. 50mm, 70mm, 100mm
Professional taping and smoothing knife for caulking, filling, vinyls and textile products. Heavy duty design, comfortable rubber grip. Available in 6 - 12 inch sizes.
Hammer down any loose or raised nails, below the surface of the timber, prior to sanding and filling. Avoid damaging your abrasive sanding paper, and get a better finish when filling. Fitted with Proforms patented NailWing holding tool. 1/32 inch, 2/32 inch and 3/32 inch sizes
3 piece set plus free center punch. Hammer down loose or raised nails, below the surface of the timber prior to sanding and filling. Avoid damaging your abrasive sanding paper, and get a better finish when filling. Fitted with Proforms patented NailWing holding tool. Set includes 1/32 inch, 2/32 inch, 3/32 inch sizes plus free center punch.
Proforms patented Nail Wing, fits small diameter striking tools like nail sets and center punches etc. Allows an unobstructed view of what you are striking; offers precision placement; and allows you to work more safely. It's a far better way to hold the tool.
For perforating vinyl wallpapers prior to wetting with wallpaper stripping solution, or steam stripper. Allows the liquid or steam to more effectively penetrate the wall-covering. Off-angled wheels cause the spikes to tear outwards across the wallcovering surface, rather than penetrating the wall, creating hundreds of tiny tears in the paper.
40mm wide industry standard aluminium backed single edge razor blades. Supplied in a sprung safety dispenser which contains 10 razor blades, as replacements to fit our Retractable Window / Glass Scraper. Clear plastic safety dispenser is also designed to store your used blades for later safe disposal.
40mm wide industry standard aluminium backed single edge razor blades. Supplied individually wrapped in a bulk push-out carton containing 100 razor blades, as replacements to fit our Retractable Window / Glass Scraper.
Stainless steel retractable auto-lock window and glass scraper. Quickly removes paint drips, marks and other material stuck to the glass by scraping. Heavy duty rust resistant, full metal construction. Very comfortable ergonomic design only weighs. Takes replaceable single edge blades.
Hardwood handle Scale tang scraper, with high quality stainless steel blade. Use as a stripping knife for removal of paint and wallpaper. High quality tools for the professional decorator. Available in 1, 1.5, 2, 3 and 4 inch blades.
Heavy duty flat wall replacement blades for use with 4 inch flat wall scraper. High carbon steel blades. 100mm long, one side sharpened, the other side blunt. Handy plastic dispenser. 10 blades per pack. British made.
Use for trimming and smoothing wallpaper and wallcoverings. Sturdy, but slimline design to fit in your back trouser pocket. Comfortable nylon handle. Rust free. Dimensions: 11.5 x 5 inch (290 x 125mm).
High quality scraper handle which takes interchangable scraper blades. 6 different blade shapes to choose from to suit your project. Round varnished hardwood handle.
Hand forged blade fits the Trufa Stripping Knife Handle. Approximately 65mm measured from top point to bottom. Germany manufactured.
Hand forged rectangular blade which fits the Trufa Stripping Knife Handle. Approximately 75mm long. Hand forged in Germany.
Blade fits the Trufa Stripping Knife Handle. Three sizes of blades available 60mm, 80mm and 100mm measured along each side.
Heavy Duty 4 inch Scraper with unique quick release blade clamp (no need to fiddle around with a screwdriver). Only takes Titan double thickness blades. Manufactured from rust resistant materials, and comfortable soft grip handle.
Titan Heavy Duty 4 inch replacement Scraper Blades for use with the 4 inch Titan heavy duty scraper. Plastic dispenser box. 10 Blades per pack.
Heavy Duty 6 inch Scraper with unique quick release blade clamp (no need to fiddle around with a screwdriver). Only takes Titan double thickness blades. Manufactured from rust resistant materials, comfortable soft grip handle with additional neoprene grip.
Titan Heavy Duty 6 inch replacement Scraper Blades for use with the 6 inch Titan heavy duty scraper. 5 Blades per pack.
Triangular Shavehook / scraper - for removing paint and varnish etc. From flat surfaces, wooden blade with stainless tooling.
Professional 2-part filler mixing palette, with thumb hole for easy grip, rather like an artists palette. Contains 100 x disposable sheets of specially formulated paper which avoids soaking up resins and solvents. Quick, clean solution for the mixing 2-part fillers
Trufa professional burn-off scraper, 2mm thick hand forged high quality steel blade, extremely strong! 50mm blade width, ground to a point on one side. Confortable round varnished hardwood handle.
Professional quality smoother for spreading and smoothing vinyl wallcoverings, or filling and caulkng. Available in 6 inch (150mm) to 14 inch (350mm) sizes.
Wallpaper scraper with Screw-fit handle for attaching to any of our extension poles allowing easy removal of wallpaper from hard to reach places.
Double cutting wallpaper knife for splicing overlapping wallcoverings. Ensures a perfect seam every time. Does not cut into drywall, or plaster board, or lining paper. Takes our standard double edge razor blades.
Double cutting wallpaper knife for splicing overlapping wallcoverings. Ensures a perfect seam every time. Does not cut into drywall, or plaster board, or lining paper. Takes our single edge razor blades.
Flexible plastic wallpaper and wallcovering smoothing blade. Comfortable handgrip with hanging hole. Wallpaper Smoother Dimensions: 265 x 157mm x 13mm (10.5 x 6.25 inch).
Slide lock window scraper. Retractable blade. Fitted with British made carbon steel Stanley type blade. Takes replacement blades. Comfortable ergonomic design with hanging hole. Tough but lightweight ABS plastic body.
Basic long handled window scraper, with safety cover. Fitted with British made carbon steel Stanley type blade. Takes replacement blades. Hanging hole. ABS plastic body.
Wooden Paint Stirrers for stirring paints and coatings prior to use. 1 inch wide, by 12 inches (300mm) long. Stirring stick is suitable for stirring cans up to standard 5 litre can and 10 litres tub height.
Quickly and easily score and perforate waterproof wallcoverings with this multi-directional scorer tool for easy stripping. Single scoring head for smaller areas.
Quickly and easily score and perforate waterproof wallcoverings with this multi-directional scorer tool for easy stripping. Triple scoring head for faster perforating of larger surfaces.