FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
Rustoleum CombiColor 7300MS Multi-Surface Gloss
*all prices include VAT |
Rustoleum CombiColor Multi-Surface 7300MS Gloss is a solvent-borne, all-in-one primer and protective paint finish for all types of substrates including metal, mdf, masonry, tiles, most rigid plastics, old concrete and more. Available in an enormous range of colours, which are shipped on a next working day service. It's also available in Satin, Matt in white or black.
Rustoleum CombiColor Multi-Surface 7300 Gloss, is based on a modified alkyd resin, and provides good adhesion to many substrates. Suitable for exterior and interior application by brush or short/medium pile roller. It is not recommended for spray application. The specification of a separate anti-corrosion primer is recommended in more aggressive industrial environments. Recommended wet film application thickness is 105 microns (dries to 62 microns). Roller application may require 2 coats to achieve recommended dry film thickness.
Rustoleum's Combicolor range is deliberately formulated to produce a slightly softer and extensible protective coating which can offer long maintenance periods. So don't expect a rock hard coating.
It's available in 1 litre and 2.5 litre sizes to ANY British Standard, RAL, Little Greene, Farrow & Ball or NCS colour etc., as a customised order.
How to order Mixed Colours...
Just select the 'mixed colour' option from the drop-down box, then send us an email containing the colour you would like your Combicolor to be tinted to or Simply specify your colour in the comments section after you have confirmed your order. (Please note: mixed colours are customised according to your colour requirements, cancellation restrictions apply).
Application: Follow manufacturers instructions. Clean and prepare surfaces. Apply 1-2 coats of Rustoleum CombiColor Multi-Surface 7300 Gloss by brush or roller (not recommended for spraying) to all areas to be decorated. (New galvanised, Zinc and Aluminium surfaces should first be primed with Zinsser Bulls Eye 123). Very porous surfaces should be sealed with an appropriate primer prior to application. Aged galvanized (matt grey appearance, showing white rust) should first be cleaned with an acid cleaner (e.g. RustOleum SE108) or by mechanical abrasion with for example ScotchBrite, then primed with Zinsser Bulls Eye 123. Thinning: not recommended. Theoretical Coverage: 9-10 square meters per litre (practical coverage will be less, depending on the profile and porosity of the substrate). Touch dry: 4 hours. Hard dry: 7 days. Recoatable: 16 hours. Times given are for 20 deg.C and good drying conditions, (drying times will be increased at colder temperatures or poorer drying conditions). Do not apply when application or drying conditions will be below 5 deg.C. Note: If you are unsure of the substrate we always advise customers to do a small adhesion test prior to full decoration.
Further information
Use this product with
