FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
Rustoleum CombiColor 7300 Original Matt
*all prices include VAT |
Rustoleum CombiColor 7300 Original Matt is a solvent-borne, all-in-one primer and protective paint finish for metal surfaces available white and black only. It's also available in Gloss, Satin and Metallic finishes.
Rustoleum CombiColor 7300 Original Matt provides a no nonsense, flexible, protective and decorative solvent-borne gloss finished paint coating system for building and maintenance professionals. It can be specified with confidence, even for direct application on to prepared rusting ferrous metal surfaces. It's hybrid modified urethane formulation offers excellent sag resistance for high build application in just one coat, and offers good low temperature drying properties. It produces an attractive, flexible and protective paint film.
Suitable for exterior and interior application by brush, short/medium pile roller and HVLP spray in the building and light industrial sector (the specification of a separate anti-corrosion primer is recommended in more aggressive industrial environments ). Recommended wet film application thickness is 100 microns (dries to 55 microns). Brush or roller application may require 2 coats to achieve recommended dry film thickness.
Rustoleum's Combicolor range is deliberately formulated to produce a slightly softer and extensible protective coating which can offer long maintenance periods. So don't expect a rock hard coating. But in our own tests 7 days after application, we found the Combicolor 7300 Original offers much better initial abrasion resistance, compared with Rustoleum's other Combicolor 7300MS Multi-surface product.
It's available off the shelf in white (RAL 9010) and black (RAL 9005)
Application: Follow manufacturers instructions. Clean and prepare surfaces. Apply 1-2 coats of Rustoleum CombiColor 7300 by brush, roller or spray to all areas to be decorated. (Galvanised, Zinc and Aluminium surfaces should first be primed with CombiPrimer 3302 Adhesion Primer). Thinning: up to 10% Rustoleum 7301 Thinner. Theoretical Coverage: 10 square meters per litre (practical coverage will be less, depending on the profile and porosity of the substrate). Touch dry: 2 hours. Hard dry: 7-14 days. Recoatable: 16 hours. Times given are for 20 deg.C and good drying conditions, (drying times will be increased at colder temperatures or poorer drying conditions). Do not apply when application or drying conditions will be below 5 deg.C.
Further information
