Mirka

Mirka 211 Wet and Dry Abrasive Paper Sheets 230mm x 280mm

Technical 211 Wet and Dry waterproof abrasive paper. 230 x 280mm sheets. Supplied into the US market for high quality applications. Flexible, latex impregnated, anti-slip paper backing with a fully resin bonded grit. Supplied in full sheets down to very fine grades.

As low as

£0.32
Mirka Hand Dust Extraction Sanding Block 70 x 198 mm

Medium sized, 22 hole hand dust extraction sanding block, size 70 x 198mm. Ideal for general purpose use. Use with any sanding strips that use a hook n loop fastening system. Most effective when used with Abranet. 20mm hose connection incorporates an adjustable suction valve. Supplied with a 20/28mm adaptor.

As low as

£16.77
Disc Hand Sanding Grip Block takes Mirka 150mm dia. Discs

Smooth white soft cellular foam hand held sanding block. Accepts 150mm dia hook an loop disks which are applied onto the face and wrap around both sides. Easier to keep clean, good for getting into corners, ideal for circular power sander users who already have existing stocks of discs.

As low as

£14.34
Mirka 70 x 198mm Dust Extraction Hand Sanding Block PLUS 74 x evoMESH strips.

NEW. Great value sanding kit - when it's gone, it's gone! Mirka Dust extraction hand sanding block 70 x 198mm. With Mirka interface pad and 74 sheets of evoMESH hook n loop abrasives, worth over £15 to get you started.

As low as

£26.06
Fossa Pad Protector Blank Discs 5in / 125mm

Spare blank padsaver discs for use with the Fossa Pad Protector hole cutters. Punch out any hole pattern, to match the pattern of holes on your Festool, Mirka etc. disc sander backing pad.

As low as

£3.34
Fossa evoMESH Sheets 81 x 132mm

NEW evoMesh abrasive, handy pre-cut strips in the popular 81 x 132mm size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment. Fits Mirka orbital sanders, and the Festool RTS 400 compact sander.

As low as

£0.00
Cork Sanding Grip Block 70 x 125

Cork Sanding Grip Block for use with 70 x 125mm hook n loop abrasive sheets and strips including evoMESH, Abranet, Sianet etc. Lightweight cork hand sander block with contoured grip, comfortable for periods of extended use. Hook face for quick attachment and replacement of abrasive sheets and strips.

As low as

£11.89
Interface Pad 150mm Disc 11mm / 21 Hole

11mm flexible soft foam interface pad with 21 holes suitable for use with ALL our hook n loop dust extraction disc backing pads including Mirka Abranet / Autonet / CEROS backing pads. Ideal for sanding rounded surfaces and contours.

As low as

£10.67
Fossa Hook and Loop Hand Sanding Block 70x125mm

Fossa Sanding Block comprises a 70 x 125mm soft and flexible contoured grip, with hook and loop backing, which fit's all popular hook and loop abrasives.

As low as

£7.00
Pad Saver Disc 150mm / 51 hole

51 hole Pad Saver fits ALL our 150mm backing pads including Mirka / Abranet / Autonet / Ceros. The Pad Saver protects the backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad.

As low as

£6.90
Pad Saver Disc 150mm / 21 hole

21 hole Pad Saver suitable for ALL our dust extraction 150mm backing pads including Mirka / Abranet / Autonet / Ceros. The Pad Saver protects the backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad.

As low as

£7.29
Fossa Pad Protector Blank Disc Set 5in / 125mm

DIY 5in/125mm Fossa Pad Protector Blank Disc Set, contains 2 x hole cutters and 1 x blank, hook n loop pad saver, so you can punch your own hole pattern to match the hole pattern of your sanders backing pad. The Pad Saver prevents the expensive hook n loop disc backing pad on your sander from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. Additional blank pad savers can be purchased separately.

As low as

£12.31
Fossa Pad Protector Blank Disc Set 6in / 150mm

DIY 6in/150mm Fossa Pad Protector Blank Disc Set, contains 2 x hole cutters and 1 x blank, hook n loop pad saver, so you can punch your own hole pattern to match the hole pattern of your sanders backing pad. The Pad Saver prevents the expensive hook n loop disc backing pad on your sander from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. Additional blank pad savers can be purchased separately.

As low as

£12.96
Mesh Sanding Discs 125 mm

5 inch / 125mm abrasive discs. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a longer lifespan. Also ideal for use with dust extraction equipment. Fit's all machine disc sanders with 5 inch hook n loop backing pads.

As low as

£0.28
Mesh Sanding Discs 150 mm

6 inch / 150mm abrasive discs. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a longer lifespan. Also ideal for use with dust extraction equipment. Fit's all machine disc sanders with 6 inch hook n loop backing pads.

As low as

£0.37
Fossa evoMESH Sheets 70 x 125mm

NEW evoMesh abrasive, handy pre-cut strips in the most popular 70 x 125mm size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment.

As low as

£0.00
FP Cyclone 150mm / 6in 53 Hole Soft Grip Backing Pad

FP Cyclone 150mm / 6in 53 Hole Soft, Sander Grip Backing Pad. Hollow chamber and vortex design aid even suction across the pad. Directly accepts Festool, evoMESH, Abranet & Sianet mesh abrasives. Supplied with both 5/16th thread, and M8 thread fixings.

As low as

£36.10
FP Cyclone 150mm / 6in 53 Hole Medium Grip Backing Pad

FP Cyclone 150mm / 6in 53 Hole Medium Firm, Sander Grip Backing Pad. Hollow chamber and vortex design aid even suction across the pad. Directly accepts Festool, evoMESH, Abranet & Sianet mesh abrasives. Supplied with both 5/16th thread, and M8 thread fixings.

As low as

£36.10
Fossa Dust Extraction Hand Sanding Starter Kit 70x125mm (inc Hose / 30 evoMESH Sheets).

Dust Extraction Hand Sanding Starter Kit includes 70 x 125mm dust extraction hand sanding block with 20mm swivel connector, 20-28mm adaptor, 20mm x 4m vacuum hose and 30 mixed sheets of Fossa evoMESH® 10 x P80, 10 x P120, and 10 x P180.

As low as

£0.00
Fossa evoMESH Abrasive Roll 115mm x 10m

NEW evoMesh abrasive, 10 meter long rolls of of evoMESH in a standard 115mm width which you can cut to your own size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment. P80, P120, P180 and P240.

As low as

£0.00