FREE DELIVERYOn orders over £40.00
ALL ORDERSSent using standard next working day courier
SAME DAY DESPATCHOn all orders
Totally flexible non-cracking multi-purpose abrasive pad available in super fine, fine, medium and course grades. Fantastic cutting power. Ideal for mouldings, denibbing and general abrading. Manufactured from high quality soft foam / sponge. Use wet or dry. Greater lifespan. 95 x 118 x 13 mm. Singles and packs of 250 pads
Professional aluminium hand sander with easy grip handle. Ideal for sanding large flat surfaces such as plaster and dry wall joints, timber and flush doors etc. 243 x 82mm solid aluminium plate.
Highly flexible aluminium oxide abrasive which is resin-over-resin bonded to a J weight cotton cloth backing. You cant get any more flexible than this cloth backed abrasive for hand sanding. 5 meter x 115mm rolls.
4 piece hand sanding block set containing a variety of different clog resistant sanding blocks. Good for nasty projects with protruding nails and sharp objects where sandpaper might tear. The smaller sized blocks are useful in corners and other tight spaces.
450g / 1lb individually wrapped bulk rolls of Steel Wool offering fantastic savings. High quality British manufactured steel wool, in popular grades 000 (extra fine), 00 (fine), 1 (medium) and 3 (coarse). Even larger discounts available if you buy in bulk.
Highly flexible circular neoprene pad with velcro face and rear elasticated hand strap, which accepts any 150mm dia hook n loop abrasive sanding discs. Ideal for sanding rounded surfaces, internal coving, spindles and anything else you can wrap your hand around.
Cork Sanding Grip Block for use with 70 x 125mm hook n loop abrasive sheets and strips including evoMESH, Abranet, Sianet etc. Lightweight cork hand sander block with contoured grip, comfortable for periods of extended use. Hook face for quick attachment and replacement of abrasive sheets and strips.
Smooth white soft cellular foam hand held sanding block. Accepts 150mm dia hook an loop disks which are applied onto the face and wrap around both sides. Easier to keep clean, good for getting into corners, ideal for circular power sander users who already have existing stocks of discs.
Two sanding blocks in one. Double sided, soft density foam on one side and medium density black foam on the other. Velcro / hook n loop faces on both sides. Takes 70 x 125mm sanding strips such as Fossa evoMESH, Abranet and Mirka Q Silver.
Hard dense cellular foam sanding block in a comfortable design. Smooth surface finish for easy cleaning. Velcro / Hook n Loop face which accepts all 70 x 125mm grip strips such as Fossa evoMESH, Mirka Q Silver or Abranet abrasives.
fossa evoMESH BLUE 150mm / 6inch Ceramic Abrasive Discs. Net backing, with hook and loop attachment, fits popular dust extracting sanding equipment, for almost dust free sanding. Excellent aggressive and long lasting performance. P80, P120, P180 and P240 grits in packs of 50 discs.
general purpose, soft foam, totally flexible and non-cracking multi-purpose abrasive pad. Easily deforms for use on profiled surfaces. Popular with decorators for preparing and denibbing metal, wood and previously painted surfaces. Coarse, medium and fine grades. Sold in singles and packs of 24. Double sided.
50mm wide Fosbide Heavy Duty Tungsten Carbide Scraper. Rugged alloy construction, with comfortable handle - for long periods of use. Takes replaceable double-edge 50mm Fosbide Slimline Tungsten Carbide Blades. Use for the removal of paint, glue, rust or varnish on all surfaces. Direct alternative to the Linbide scraper.
Coarse grade 100g packs only. Useful alternative to steel wool, avoiding rust splinters in external and marine environments; safer for use around magnetically sensitive equipment; and to avoid the formation of Iron tannate when preparing Oak timbers.
Coarse grade 100g packs only. Useful alternative to steel wool, avoiding rust splinters in external and marine environments; and a whole load of other specialist uses.
Fossa Dust Extraction Hand Sanding Block 70x125mm. Use with dust extraction equipment to massively reduce sanding dust in the work environment. Accepts any hook-n-loop abrasive. Ideal for use with Fossa evoMESH®. 15 hole base plate. Comfortable soft textured hand grip. Standard swivel 20mm hose connector. Also supplied with 20 to 28mm adaptor. Supplied in singles.
Dust Extraction Hand Sanding Starter Kit includes 70 x 125mm dust extraction hand sanding block with 20mm swivel connector, 20-28mm adaptor, 20mm x 4m vacuum hose and 30 mixed sheets of Fossa evoMESH® 10 x P80, 10 x P120, and 10 x P180.
NEW evoMesh abrasive, 10 meter long rolls of of evoMESH in a standard 115mm width which you can cut to your own size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment. P80, P120, P180 and P240.
fossa evoMESH BLUE 81 x 133mm Ceramic Abrasive Strips. Net backing, with hook and loop attachment, fits popular dust extracting sanding equipment, for almost dust free sanding. Excellent aggressive and long lasting performance. P80, P120, P180 and P240 grits in packs of 50 strips.
NEW evoMesh ED abrasive, 10 meter long rolls of of evoMESH ED in a standard 115mm width which you can cut to your own size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment. P80, P120, P180 and P240.
NEW 5 inch / 125mm evoMESH ED abrasive discs. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment. Fit's all machine disc sanders with 5 inch hook n loop backing pads. Boxes of 30, and single discs.
NEW 6 inch / 150mm evoMESH ED abrasive discs. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment. Fit's all machine disc sanders with 6 inch hook n loop backing pads. Box of 30, and singles.
NEW evoMesh abrasive, handy pre-cut strips in the most popular 70 x 125mm size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment.
NEW evoMesh abrasive, handy pre-cut strips in the popular 70 x 198mm size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment.
NEW evoMesh abrasive, handy pre-cut strips in the popular 81 x 132mm size. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a much longer lifespan. Also ideal for use with dust extraction equipment. Fits Mirka orbital sanders, and the Festool RTS 400 compact sander.
Fossa Sanding Block comprises a 70 x 125mm soft and flexible contoured grip, with hook and loop backing, which fit's all popular hook and loop abrasives.
NEW - Fossa Pad Protector Enables smooth and stable sanding. The Pad Saver prevents the hook n loop disc backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. 150mm dia. / 53 Hole. The 53 holes match up with the Mirka 67 hole padsaver (excluding approx 14 extra small holes Mirka has added)
Fossa Pad Protector Enables smooth and stable sanding. The Pad Saver prevents the hook n loop disc backing pad from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. 150mm dia. / 67 hole.
DIY 5in/125mm Fossa Pad Protector Blank Disc Set, contains 2 x hole cutters and 1 x blank, hook n loop pad saver, so you can punch your own hole pattern to match the hole pattern of your sanders backing pad. The Pad Saver prevents the expensive hook n loop disc backing pad on your sander from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. Additional blank pad savers can be purchased separately.
DIY 6in/150mm Fossa Pad Protector Blank Disc Set, contains 2 x hole cutters and 1 x blank, hook n loop pad saver, so you can punch your own hole pattern to match the hole pattern of your sanders backing pad. The Pad Saver prevents the expensive hook n loop disc backing pad on your sander from rapid wear out. In effect, it is a sacrificial hook n loop layer, which is far cheaper to replace than the whole backing pad. Additional blank pad savers can be purchased separately.
Spare blank padsaver discs for use with the Fossa Pad Protector hole cutters. Punch out any hole pattern, to match the pattern of holes on your Festool, Mirka etc. disc sander backing pad.
Spare blank padsaver discs for use with the Fossa Pad Protector hole cutters. Punch out any hole pattern, to match the pattern of holes on your Festool, Mirka etc. disc sander backing pad. 6inch/150mm discs.
100g packs. An alternative to standard steel wool. Reduces the risk of rust staining on timber etc. when paint stripping with modern solvent-free (water-borne) paint strippers which we sell. Medium grade only. Very sharp. Also used for exhaust packing.
Replacement hook n loop backing pad suitable for dust extraction sanders including Mirka Ceros. Accepts Fossa evoMESH and all other hook-n-loop sanding abrasive discs. Maximum 12,000 RPM; Weight 150g Medium density; 51 Hole Dust Extraction; Both a 5/16 inch and M8 screw fitting are provided. Standard profile.
FP Cyclone 150mm / 6in 53 Hole Medium Firm, Sander Grip Backing Pad. Hollow chamber and vortex design aid even suction across the pad. Directly accepts Festool, evoMESH, Abranet & Sianet mesh abrasives. Supplied with both 5/16th thread, and M8 thread fixings.
FP Cyclone 150mm / 6in 53 Hole Soft, Sander Grip Backing Pad. Hollow chamber and vortex design aid even suction across the pad. Directly accepts Festool, evoMESH, Abranet & Sianet mesh abrasives. Supplied with both 5/16th thread, and M8 thread fixings.
225g reels of steel wool in all grades from 0000 to 5. The very finest quality British manufactured steel wool, specially graded, quality checked and sold in individually flow wrapped reels. Bulk savings if you buy in quantities of 10 rolls.
Green Aluminium Oxide Abrasive uses a heavy E weight paper backing which is electro-coated and fully resin-over-resin bonded with aluminium oxide grit for an ultra long life. 5 meter x 115mm rolls.
Tough moulded hand sanding block with sprung metal clips to hold abrasive sanding paper firmly in place, gives a better finish on flat surfaces and avoids raw finger ends. Dense cellular foam underside to ensure even contact with the surface being abraded.
Aluminium oxide closed grit, resin bonded heavy E-weight paper ideal for low pressure sanding and grinding of wood, metal, filler, lacquer and primers. Supplied to fit our Hook n Loop Hand File. Available in P60, P120 and P180 grits.
Hook n Loop nylon hand file kit plus 3 assorted abrasives in P60, P120, P180 grade. Ideal for low pressure sanding and grinding of wood, filler, lacquer, primer and metal. Replacement strips available. Overall file length 235mm.
KrudKutter Gloss Off is a chemical deglosser that can key most previously painted glossy, or hard-to-stick-to coatings instead of sanding them. It improves the adhesion of most new coatings on to old painted or varnished surfaces. 750ml Trigger spray.
Light weight but tough ABS plastic hand sander with chunky, soft cool-grip grip handle. Ideal for sanding large flat surfaces such as plaster and dry wall joints, timber and flush doors etc. 243 x 82mm ABS plastic plate.
5 inch / 125mm abrasive discs. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a longer lifespan. Also ideal for use with dust extraction equipment. Fit's all machine disc sanders with 5 inch hook n loop backing pads.
6 inch / 150mm abrasive discs. Hook n loop backing for easy attachment. Open mesh backing resists clogging for a longer lifespan. Also ideal for use with dust extraction equipment. Fit's all machine disc sanders with 6 inch hook n loop backing pads.
3 piece mini scratch brush set, each set contains one non-ferrous brass wire brush, one stiff nylon brush, and one wire steel brush. Budget wire brushes, ideal for cleaning and paint preparation before decorating. Small wire brush can get into smaller areas. Each brush is 170mm long, and is manufactured with a tough plastic offset handle.
Technical 211 Wet and Dry waterproof abrasive paper. 230 x 280mm sheets. Supplied into the US market for high quality applications. Flexible, latex impregnated, anti-slip paper backing with a fully resin bonded grit. Supplied in full sheets down to very fine grades.
NEW. Great value sanding kit - when it's gone, it's gone! Mirka Dust extraction hand sanding block 70 x 198mm. With Mirka interface pad and 74 sheets of evoMESH hook n loop abrasives, worth over £15 to get you started.
Mirka Abranet Ace HD Grip Strips 81 x 133mm for dust free sanding is durable and tough with ceramic grains. The strong net structure resists high wear and tear which makes the Abranet Ace HD ideal for heavier duty applications.
Discs to fit Mirka's range of 150mm Ceros electric and pneumatic machine disc sanders with dust extraction capabilities, as well as their range of disc hand sanding blocks and pads, or any other 150 mm hook n loop backed machine disc sander. Ideal for all painting, decorating and sanding projects. P80, P120, P180, P240 and P320 grits.
Contains Mirka's most popular 70 x 198mm dust extraction hand sanding block, together with a 10 mm interface pad for non-flat surfaces. A 4 meter dust extraction hose with adaptor, and 5 x strips of Mirka Abranet for you to get started with dust free sanding.
Cheaper 10 meter long rolls of the original multifunctional Abranet in a standard 115mm width, which you can cut to your own size. Ideal for tougher painting and decorating sanding projects. Eliminates the frustrating problem of dust clogging the sand paper. Hook n loop backing. Fantastic for dry sanding by machine or by hand. Even better when combined with dust extraction equipment.
Mirka Abranet kit comprises a 70 x 125mm soft/medium, flexible contoured grip hook & loop hand sanding block, together with 3 mixed strips of Mirka Abranet 70 x 125 mm in the most popular grits P120, P180 and P240.
Strips to fit Mirka's Handy dust extraction hand sanding block. Ideal for all painting and decorating sanding projects. Eliminates the frustrating problem of dust clogging traditional sand paper. Hook n loop backing. Fantastic for dry sanding by machine or by hand. Even better when combined with dust extraction equipment.
The most popular size of Mirka's Abranet. Ideal for all painting and decorating sanding projects. Eliminates the frustrating problem of dust clogging the sandpaper. Hook n loop backing. Fantastic for dry sanding by machine or by hand. Even better when combined with dust extraction equipment.
Ideal for all painting and decorating sanding projects. Eliminates the frustrating problem of dust clogging the sandpaper abrasive. Hook n loop backing. Fantastic for dry sanding by machine or by hand. Even better when combined with dust extraction equipment.
Strips to fit Mirka's Handy dust extraction hand sanding block. Ideal for all painting and decorating sanding projects. Eliminates the frustrating problem of dust clogging the sand paper abrasive. Hook n loop backing. Fantastic for dry sanding by machine or by hand. Even better when combined with dust extraction equipment.
Fits Festool RTS400 compact dust extraction sander. Ideal for all painting and decorating sanding projects. Eliminates the frustrating problem of dust clogging the sandpaper. Hook n loop backing. Fantastic for dry sanding by machine or by hand. Even better when combined with dust extraction equipment.
Heavier duty, slightly less flexible grade of the original multifunctional Abranet, originally designed for use in the bodyshop industry. Fit Mirka's range of 150mm Ceros electric and pneumatic machine disc sanders with dust extraction capabilities, or any other 150 mm hook n loop backed machine disc sander. Ideal for all painting, decorating and sanding projects. P80, P120, P180, P240 and P320 grits.
Mirka BaseCut Abrasive Rolls 115mm wide. Lower cost, but high-efficiency choice semi-open pattern, aluminium oxide sanding paper. D/C weight paper backing, Resin over Resin bond. High initial aggressive cut, and a long working lifespan. 50m rolls, and 5m cut lengths.
Mirka Coarse Cut Abrasive Roll 115mm wide. Very High performance, high-efficiency aluminum oxide sanding abrasive, with a specially reinforced material with hook and loop fleece backing. Progressive Bond dust-binding technology. Ideal for all kinds of coarse sanding work. 25m rolls, and cut 5m lengths.
Genuine Mirka Fleece Dust Bag suitable for all of Mirka's 415/412 and 915/912 Dust Extraction Machine models.
Soft, flexible abrasive pads, supplied in perforated rolls containing 200 pads for easy tear off. Ideal for profiled surfaces and mouldings etc. Abrasive is applied to only one side - so is kinder to your hands. Flexible closed-cell foam backing distributes pressure for more even sanding. Suitable for both wet, and dry projects. P150, P180, P240, and P320 grits
Flexible dust extraction hose for use with all of Mirka's hand sanding blocks with 20mm connections. The universal adaptor fitted to one end, allows the hose to connect to a range of other vacuum extraction machines.
Smaller, 13 hole hand dust extraction sanding block, size 70 x 125mm. Ideal for smaller surfaces and difficult-to-reach areas. Use with any sanding strips that use a hook n loop fastening system. Most effective when used with Fossa evoMESH or Abranet. 20mm hose connection incorporates an adjustable suction valve. Supplied with a 20/28mm adaptor.
Medium sized, 22 hole hand dust extraction sanding block, size 70 x 198mm. Ideal for general purpose use. Use with any sanding strips that use a hook n loop fastening system. Most effective when used with Abranet. 20mm hose connection incorporates an adjustable suction valve. Supplied with a 20/28mm adaptor.
Aluminium Oxide Abrasive Rolls 115mm wide. Heavy paper backing, electro-coated and fully resin bonded with aluminium oxide grit. Designed for general purpose machine sanding of timber in orbital sanders, and for hand sanding as a heavy duty abrasive
For sanding surfaces prior to the application of finishing coats, primers or lacquers. 152 x 229 x 10mm pads. Excellent for sanding wood, plastic, metal components as well as painted surfaces where their woven structure resists clogging.
New, highly flexible and deformable pad, which is thinner, yet tougher and more durable. Abrasive is distributed evenly throughout its structure, producing an extremely aggressive pad which achieves a dense scratch pattern. Ideal for contoured surfaces, conforming to complex shapes, or wrapping around spindles and railings. Grits P320, P1500, P2500.
Aluminium Oxide hook and loop abrasive strips 70 x 125mm (No Hole). Velcro backing for easy attachment to the matching Grip Block. Unique sterate coating gives very high resistance to clogging and loading, especially when sanding soft/incompletely cured paints/lacquers
Miniature solid tungsten carbide de-nibbing tool for quickly and easily removing paint drips, runs, sags and dirt from smooth surfaces. Gently push the sharp chamfered edges against the paint blemish whilst the blade is at an almost horizontal angle to remove in one sweep. Size 48 x 28mm.
Sanding mesh, abrasive is bonded to a water resistant, open mesh which resists clogging during use. Ideal for plaster, plasterboard and drywall finishing. Can be used both sides. 115mm wide x 5 meter roll.
238 x 84 mm lightweight ABS plastic sanding pole for sanding walls, ceilings and floors and other flat surfaces. Fits to any of our screw-fit extension poles. Abrasive sanding paper is simply clipped into place. Super-light, but strong construction.
Traditional sanding pole swivel sander head for sanding walls, ceilings and floors and other flat surfaces. Abrasive sanding paper is simply clipped into place. Superior cast aluminum construction which is strong but light. 240 x 84 mm.
3 inch dia. flexible abrasive ball for connection to a drill, for preparation by abrasion of surfaces for painting on awkward nooks and crannies. Used a lot in the motor industry. Abrasive coated nylon fibre pads are firmly fastened together with a spindle. Choose from green (coarse) - Grey (ultra fine).
SIA 1950 Siaspeed and Siasoft abrasive pads on a roll. Top class Swiss manufactured abrasive. High stock removal, perfect for prep and finishing before paining surfaces. Dispenser box 115mm x 25m long perforated strip of foam backed abrasive. Each tear-off pad measures 122mm x 115mm.
Sianet Abrasive Discs 150mm / 6in dia. A hook and loop attached disc which fits most sander backing pads. 7900 series Aluminium Oxide grit bonded to very strong, flexible, woven polyester fibre net. An alternative to Abranet and evoMESH. P80, P120, P180, P240 and P320 grits. Single disc's, and boxes of 50 discs.
Sianet Abrasive Discs 225mm dia. A hook and loop attached disc which fits most drywall sander backing pads. 7900 series Aluminium Oxide grit bonded to very strong, flexible, woven polyester fibre net. An alternative to Abranet. P80, P100, P120, P150, P180, P220 and P240 grits. Single disc's, and boxes of 25 discs.
Sianet Abrasive Rolls 115mm wide x 10 meters. A hook and loop attached sheet which fits most sander backing pads. 7900 series Aluminium Oxide grit bonded to very strong, flexible, woven polyester fibre net. An alternative to Abranet and evoMESH. P80, P120, P180, P240 and P320 grits. 10 meter long rolls.
Sianet Abrasive Strips 70 x 125 mm. A hook and loop attached sheet which fits most sander backing pads. 7900 series Aluminium Oxide grit bonded to very strong, flexible, woven polyester fibre net. An alternative to Abranet and evoMESH. P80, P120, P180, P240 and P320 grits. Single strips, and boxes of 50 strips.
Sianet Abrasive Strips 81 x 133 mm. A hook and loop attached sheet which fits most sander backing pads. 7900 series Aluminium Oxide grit bonded to very strong, flexible, woven polyester fibre net. An alternative to Abranet and evoMESH. P80, P120, P180, P240 and P320 grits. Single strips, and boxes of 50 strips.
Sianet Ceramic Abrasive Discs 150mm / 6in dia. A hook and loop attached disc which fits most sander backing pads. 7500 series Ceramic abrasive grit is bonded to very strong, flexible, woven polyester fibre net. An alternative to Abranet Ace. Longer effective life makes them well suited to sanding dense solid surfaces and plaster. P80, P120, P180, P240 and P320 grits. Single disc's, and boxes of 50 discs.
SiaOne 15 hole Abrasive Discs 150mm are a good value hook and loop attached abrasive disc. Offers very coarse grades down to P40 and P60. Flexible paper backing. Good process stability. Offers very aggressive initial cut. P40 - P320. Single discs and Box's 50 discs.
Medium grade steel wool pads for general purpose tasks, cleaning of copper pipe and fittings, and paint removal and preparation. Each pack of 8 pads weights around 150 grams.
Handy multi-purpose mixed pack of Steel Wool containing 3 x 20 gram finger rolls, consisting of one roll each of; fine grade, medium grade, and coarse grade. High quality British manufactured wire wool.
Yellow Aluminium Oxide Abrasive uses a heavy E weight paper backing which is electro-coated and fully resin-over-resin bonded with aluminium oxide grit for an ultra long life. 10 meter x 115mm rolls.
Copyright ©1999-2024 by Decorating Direct Limited